Valid 2V0-41.20 Exam Q&A PDF 2V0-41.20 Dump is Ready (Updated 92 Questions)
Exam Questions and Answers for 2V0-41.20 Study Guide
VMware 2V0-41.20 Exam Certification Details:
| Recommended Training / Books | VMware NSX-T Data Center: Install, Configure, Manage [V3.0] |
| Number of Questions | 70 |
| Exam Code | 2V0-41.20 |
| Schedule Exam | PEARSON VUE |
| Passing Score | 300 / 500 |
NEW QUESTION 21
Which to steps must an NSX administrator take to integrate VMware Identity Manager in NSX-T to support role-based access control? (Choose two.)
- A. Add NSX Manager as a Service Provider (SP) in VMware Identity Manager.
- B. Create a SAML authentication in VMware Identity Manager using the NSX Manager FQDN.
- C. Enter the service URL, Client Secret, and SSL thumbprint in NSX Manager.
- D. Create an OAuth 2.0 client in VMware Identity Manager.
- E. Enter the Identity Provider (IdP) metadata URL in NSX Manager.
Answer: C,D
NEW QUESTION 22
Which component does the hyperbus interface (vmk50) provide network connectivity to?
- A. virtual machines running on the same hypervisor
- B. virtual machines running in the same segment
- C. containers running on ESXi/KVM transport nodes
- D. virtual machines and containers running across transport nodes
Answer: C
NEW QUESTION 23
What are two valid options when configuring the scope of a distributed firewall rule? (Choose two.)
- A. Tier-1 Gateway
- B. Segment Port
- C. DFW
- D. Group
- E. Segment
Answer: C,D
NEW QUESTION 24
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hair pinning?
- A. Add partner SVMs to an edge cluster.
"For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster." - B. Centralize partner SVMs in a service cluster.
- C. Create a secondary vNIC on each quest VM for SVM communication.
- D. Place a partner SVM on each compute cluster node.
Answer: D
NEW QUESTION 25
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN- backed logical switch?
- A. Downlink interface
- B. Service interface
- C. VLAN Uplink
"The service interface is a special-purpose port to enable services for mainly VLAN-based networks. North-south service insertion is another use case that requires a service interface to connect a partner appliance and redirect north-south traffic for partner services. Service interfaces are supported on both active-standby Tier-0 logical routers and Tier-1 routers. Firewall, NAT, and VPNs are supported on this interface. The service interface is also a downlink" - D. Loopback Router Port
Answer: B
NEW QUESTION 26
An NSX administrator has been tasked with deploying a NSX Edge Virtual machine through an ISO image.
Which virtual network interface card (vNIC) type must be selected while creating the NSX Edge VM allow participation in overlay and VLAN transport zones?
- A. Flexible
- B. VMXNET3
- C. e1000
- D. VMXNET2
Answer: B
NEW QUESTION 27
What are three characteristics of a transport zone? (Choose three.)
- A. defines the potential reach of transport nodes
- B. defines the scope and reachability of a Segment
- C. configured with multiple N-VDS
- D. configured with a Single N-VDS
- E. optional for creating a segment
Answer: A,B,D
NEW QUESTION 28
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN- backed logical switch?
- A. Downlink interface
- B. VLAN Uplink
- C. Service interface
- D. Loopback Router Port
Answer: C
NEW QUESTION 29
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)
- A. 0
- B. 1234
The NSX Manager management plane communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1234. CCP communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1235. Taken from NSX-T ICM 3.0 Lecture manual - C. 1
- D. 2
- E. 3
Answer: A,B
NEW QUESTION 30
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. set support-bundle file vcpnv.tgz
- B. vm-support
- C. get support-bundle file vcpnv.tgz
- D. esxcli system syslog config logger set --id=nsxmanager
Answer: C
NEW QUESTION 31
Where are Distributed Firewall logs containing access decisions stored?
- A. Hypervisor transport node
- B. NSX API
- C. NSX Edge
- D. NSX Manager
Answer: D
NEW QUESTION 32
Which network tool cloud an administrator use on an ESXi 7 host to capture packets when troubleshooting connectivity issues?
- A. net-stats
- B. tcpdump
- C. Wireshark
- D. pktcap-uw
Answer: D
Explanation:
If you do when troubleshooting connectivity issues on your Virtualization environment. This post will help you to capture Network traffic on ESXi host using pktcap-uw tool.
NEW QUESTION 33
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the GENEVE protocol on the ESXi transport node? (Choose two.)
- A. esxcfg-vmknic -1
- B. net-dvs
- C. esxcli network ip interface ipv4 get
- D. esxcfg-nics -1
- E. esxcli network nic list
Answer: A,C
NEW QUESTION 34
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hairpinning?
- A. Centralize partner SVMs in a service cluster.
- B. Create a secondary vNIC on each quest VM for SVM communication.
- C. Add partner SVMs to an edge cluster.
- D. Place a partner SVM on each compute cluster node.
Answer: D
Explanation:
Explanation
"For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster."
NEW QUESTION 35
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)
- A. Advertise All LB SNAT IP Routes
- B. Advertise All LB VIP Routes
- C. Advertise All NAT Routes
- D. All Static Routes
- E. Information
Answer: A,B
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EEBA627A-0860-477A-95A7-7645BA562D62.html
NEW QUESTION 36
An NSX administrator has configured a KVM hypervisor as a transport node.
Which kernel module on KVM implements a N-VDS?
- A. nsx-vswitch
- B. dyswitch
- C. etherswitch
- D. openvswitch
Answer: D
NEW QUESTION 37
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. set support-bundle file vcpnv.tgz
- B. vm-support
- C. get support-bundle file vcpnv.tgz
- D. esxcli system syslog config logger set --id=nsxmanager
Answer: B
NEW QUESTION 38
An NSX administrator has deployed an NSX Edge on a bare-metal server.
Which command registers the NSX Edge with the NSX Manager?
join management-cluster <nsx-cluster-IP> username admin password <admin-
- A. thumbprint <nsx-manager-thumbprint>
join management-plane <nsx-nanager-ip> username admin password <admin- - B. thumbprint <nsx-manager-thumbprint>
join policy-manager <nsx-manager-ip> username root password <root-password> - C. password> thumbprint <nsx-manager-thumbprint>
join cluster <nsx-cluster-IP> username root password <root-password> - D. password> thumbprint <nsx-manager-thumbprint>
Answer: D
NEW QUESTION 39
Where are Distributed Firewall logs containing access decisions stored?
- A. NSX API
- B. Hypervisor transport node
- C. NSX Manager
- D. NSX Edge
Answer: B
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A
NEW QUESTION 40
......
VMware 2V0-41.20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
Certification dumps - VCP-NV 2V0-41.20 guides - 100% valid: https://pass4sure.examcost.com/2V0-41.20-practice-exam.html
