[Apr-2023] 2V0-41.20 Braindumps – 2V0-41.20 Questions to Get Better Grades
2V0-41.20 Exam Dumps - Try Best 2V0-41.20 Exam Questions - ExamCost
Professional VMware NSX-T Data Center 2V0-41.20 Certification Path
Before applying for Professional VMware NSX-T Data Center 2V0-41.20 Certification, applicants are required to have at least 6 months of experience with Linux and KVM. Another 1 year experience with VMware vSphere and its command line is required as an official prerequisite for this exam. However, the recommended knowledge and experience required is discussed in detail in the “Who should take the Professional VMware NSX-T Data Center 2V0-41.20 Exam” section of this document. Kindly refer to this section for more information.
NEW QUESTION 43
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node. Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
- A. Activity Monitoring
- B. Port Mirroring
- C. Switch Visualization
- D. IPFIX
Answer: C
NEW QUESTION 44
Which two tools are used to configure centralized logging in NSX-T Data Center? (Choose two.)
- A. Syslog Server
- B. vRealize Network Insight
- C. vRealize Log Insight
- D. vRealize Operations
- E. vRealize Automation
Answer: A,C
NEW QUESTION 45
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?
- A. MONITORING
- B. GROUPING
- C. FABRIC
- D. SYSTEM
Answer: C
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 46
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Graceful Restart
- B. Local AS
- C. Route Distribution
- D. Route Aggregation
- E. BGP Neighbors
Answer: D,E
Explanation:
Explanation
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF.
NEW QUESTION 47
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A. ifconfig
- B. ipconfig
- C. debug
- D. tcpdump
Answer: A
NEW QUESTION 48
Which tool injects packets and provides various observation points along the packet's path between two NSX-T managed objects?
- A. SPAN mirrors
- B. Traceflow
- C. Port Mirroring
- D. IPFIX
Answer: B
Explanation:
Reference:
2Fnsxt_21_admin.pdf&usg=AOvVaw2DqQfqPkhzWQfiJP2SgNbO (213)
NEW QUESTION 49
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?
- A. MONITORING
- B. GROUPING
- C. FABRIC
- D. SYSTEM
Answer: C
NEW QUESTION 50
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)
- A. An Edge can be the Rendezvous Point.
- B. Multicast is supported in ESXi and KVM transport nodes.
- C. Tier-0 gateways can be the Rendezvous Point.
- D. IGMP Snooping is used to populate multicast forwarding tables.
- E. Multicast routing is implemented with PIM Sparse-Mode.
Answer: D,E
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 51
Which two commands are used to query the arp-table of a logical switch? (Choose two.)
- A. get logical-switch arp-table <vni>
- B. get logical-switch arp-table
- C. get logical-switch arp-table <logical-switch-uuid>
- D. get logical-switch <vni> arp-table
- E. get logical-switch <logical-switch-uuid> arp-table
Answer: D,E
NEW QUESTION 52
When running nsxcli on an ESXi host, which command will show the Replication mode?
- A. get logical-switch status
- B. get logical-switches
- C. get logical-switch <Local-Switch-UUID> status
- D. get logical-switch <Logical-Switch-UUID>
Answer: D
Explanation:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#get%20logical-switch%20%3Clogical-switch-id%3E%202
NEW QUESTION 53
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the GENEVE protocol on the ESXi transport node? (Choose two.)
- A. esxcfg-vmknic -1
- B. esxcfg-nics -1
- C. net-dvs
- D. esxcli network ip interface ipv4 get
- E. esxcli network nic list
Answer: A,D
NEW QUESTION 54
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node.
Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
- A. Activity Monitoring
- B. Port Mirroring
- C. Switch Visualization
- D. IPFIX
Answer: C
NEW QUESTION 55
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi
transport node.
Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
- A. Activity Monitoring
- B. Port Mirroring
- C. Switch Visualization
- D. IPFIX
Answer: C
NEW QUESTION 56
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)
- A. Advertise All LB SNAT IP Routes
- B. Information
- C. Advertise All NAT Routes
- D. All Static Routes
- E. Advertise All LB VIP Routes
Answer: A,E
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EEBA627A-0860-477A-95
NEW QUESTION 57
Which tool could be used to inspect the path of a packet in the data plane?
- A. Netflow
- B. Traceflow
- C. Port Mirroring Session
- D. Port Connection
Answer: B
NEW QUESTION 58
What are two supported N-VDS modes? (Choose two.)
- A. Overlay Datapath
- B. Enhanced Datapath
- C. DPDK Datapath
- D. Standard Datapath
- E. Secure Datapath
Answer: B,D
Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-37BC3CEF-DCC1-4C6F-960D-CFBB31908D1C.html
NEW QUESTION 59
Where are Distributed Firewall logs containing access decisions stored?
- A. NSX API
- B. NSX Edge
- C. Hypervisor transport node
- D. NSX Manager
Answer: C
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6F9DC53E-222D-464B-8613-AB2D517CE5E3.html
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A299-0C3C3546ABF3.html
NEW QUESTION 60
What are three NSX Manager roles? (Choose three.)
- A. cloud
- B. controller
- C. zookeeper
- D. master
- E. policy
- F. manager
Answer: B,E,F
NEW QUESTION 61
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. can have a maximum of 10 edge nodes
- B. can have a maximum of 8 edge nodes
- C. must have only active-active edge nodes
- D. can contain multiple types of edge nodes (VM or bare metal)
- E. must contain only one type of edge nodes (VM or bare metal)
Answer: A,D
NEW QUESTION 62
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
- A. virsh dumpxml <VM Name> | grep interfaceid
- B. virsh get-interface <VM Name>
- C. virsh show <VM Name> | grep interfaceid
- D. virsh list-interface <VM Name>
Answer: A
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 63
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.)
- A. increased north/south bandwidth
- B. traffic load balancing
- C. stateful services leveraged
- D. traffic predictability
- E. Failover of services
Answer: A,B
Explanation:
From ICM manual:
Equal-cost multipath (ECMP) routing has several features and functions:
* ECMP routing increases the north-south communication bandwidth by combining multiple uplinks.
* ECMP routing performs traffic load balancing.
* ECMP routing provides fault tolerance for failed paths.
* A maximum of eight ECMP paths are supported.
* Hashing is based on 2-tuple IP source and destination addresses.
* ECMP routing is only available on Tier-0 gateways.
NEW QUESTION 64
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. esxcli system syslog config logger set --id=nsxmanager
- B. get support-bundle file vcpnv.tgz
- C. vm-support
- D. set support-bundle file vcpnv.tgz
Answer: B
Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
NEW QUESTION 65
Which three services are compatible with VRF Lite? (Choose three.)
- A. Load Balancer
- B. NAT
- C. DHCP
VRF Lite is not compatible with the following services:
-VPN
-Load Balancer
Taken from NSX-T ICM 3.0 Lecture Manual. - D. Intrusion Detection
- E. VPN
Answer: B,C,D
NEW QUESTION 66
An NSX administrator has deployed an NSX Edge on a bare-metal server.
Which command registers the NSX Edge with the NSX Manager?
- A. join cluster <nsx-cluster-IP> username root password <root-password> thumbprint
<nsx-manager-thumbprint> - B. join policy-manager <nsx-manager-ip> username root password <root-password> thumbprint
<nsx-manager-thumbprint> - C. join management-cluster <nsx-cluster-IP> username admin password <admin- password> thumbprint <nsx-manager-thumbprint>
- D. join management-plane <nsx-nanager-ip> username admin password <admin-password> thumbprint
<nsx-manager-thumbprint>
Answer: D
NEW QUESTION 67
......
What is the duration, language, and format of Professional VMware NSX-T Data Center 2V0-41.20 Exam
- Number of Questions: 70
- Language of Exam: English
- Duration of Exam: 135 minutes
- Passing Score: 300
- Format: Single and Multiple choice, Protored
The benefit of obtaining the Professional VMware NSX-T Data Center 2V0-41.20 Exam Certification
- VMware certified professionals are able to manage complex projects and issues
- VMware certified professionals are able to provide higher level of customer satisfaction
- VMware certifications improve job productivity
- When an company recruits or promotes an employee, human resources are responsible for the decision. Now, although applicants may have an IT history, they make their decisions in a way that records several different variables. One thing is that applicants, like the VMware Certified Advanced Professional, have formal qualifications.
Verified 2V0-41.20 exam dumps Q&As with Correct 95 Questions and Answers: https://pass4sure.examcost.com/2V0-41.20-practice-exam.html
