Pass 300-710 Exam in First Attempt Guaranteed 2022 Dumps!
300-710 Dumps Full Questions - Exam Study Guide
A popular and widely taken Cisco exam is 300-710 SNCF, which can lead its pursuers to two different and highly valuable Cisco certifications.
How to study the Securing Networks with Cisco Firepower (300-710 SNCF) Exam
For the Securing Networks with Cisco Firepower (300-710 SNCF) Exam, Cisco offers several options on their website. Cisco provides classroom training through which Cisco's authorised learning partners teach instructor-led classes all over the world. E-Learning solutions are provided be Cisco for exam preparation via selp-paced online courses. 300-710 SNCF exam dumps available at certificate-questions are the most suitable study materials. We recommend that students take the 300-710 SNCF practice exams after completing all the training. Students are highly encouraged to join Cisco's Certification communinty where they can join students from all over the world and learn together. For further exam self-study materials, refer to the links down below:
Classroom Training E-Learning Certification Community Practice Exams
We recommend a combination of hands-on experience, completion of the training course, and self-study in the areas described in the Exam Outline section of this exam guide as preparation for this exam.
Hover on to Cisco's Website and complete the official training course provided for the exam. Check for the topics mentioned in the Exam Outline section of this guide to review the online documentation, tip sheets, and user guides and study the details relevant to those topics. Refer to the links at the end of this document for more study material.
NEW QUESTION 134
What is the disadvantage of setting up a site-to-site VPN in a clustered-units environment?
- A. VPN connections can be re-established only if the failed master unit recovers.
- B. VPN connections must be re-established when a new master unit is elected.
- C. Smart License is required to maintain VPN connections simultaneously across all cluster units.
- D. Only established VPN connections are maintained when a new master unit is elected.
Answer: B
NEW QUESTION 135
An engineer currently has a Cisco FTD device registered to the Cisco FMC and is assigned the address of 10 10.50.12. The organization is upgrading the addressing schemes and there is a requirement to convert the addresses to a format that provides an adequate amount of addresses on the network What should the engineer do to ensure that the new addressing takes effect and can be used for the Cisco FTD to Cisco FMC connection?
- A. Update the IP addresses from IFV4 to IPv6 without deleting the device from Cisco FMC
- B. Cisco FMC does not support devices that use IPv4 IP addresses.
- C. Delete and reregister the device to Cisco FMC
- D. Format and reregister the device to Cisco FMC.
Answer: C
NEW QUESTION 136
A network engineer is logged into the Cisco AMP for Endpoints console and sees a malicious verdict for an identified SHA-256 hash. Which configuration is needed to mitigate this threat?
- A. Use regular expressions to block the malicious file.
- B. Add the hash to the simple custom deletion list.
- C. Enable a personal firewall in the infected endpoint.
- D. Add the hash from the infected endpoint to the network block list.
Answer: B
NEW QUESTION 137
What is a functionality of port objects in Cisco FMC?
- A. to represent protocols other than TCP, UDP, and ICMP
- B. to mix transport protocols when setting both source and destination port conditions in a rule
- C. to add any protocol other than TCP or UDP for source port conditions in access control rules.
- D. to represent all protocols in the same way
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/reusable_objects.html
NEW QUESTION 138
Which command is run on an FTD unit to associate the unit to an FMC manager that is at IP address 10.0.0.10, and that has the registration key Cisco123?
- A. configure manager local 10.0.0.10 Cisco123
- B. configure manager add Cisco123 10.0.0.10
- C. configure manager add 10.0.0.10 Cisco123
- D. configure manager local Cisco123 10.0.0.10
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/misc/fmc-ftd-mgmt-nw/fmc-ftd-mgmt-nw.html#id_106101
NEW QUESTION 139
Which command is run at the CLI when logged in to an FTD unit, to determine whether the unit is managed locally or by a remote FMC server?
- A. show configuration session
- B. system generate-troubleshoot
- C. show managers
- D. show running-config | include manager
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/command_ref/ b_Command_Reference_for_Firepower_Threat_Defense/c_3.html
NEW QUESTION 140
A network engineer is extending a user segment through an FTD device for traffic inspection without creating another IP subnet How is this accomplished on an FTD device in routed mode?
- A. by bypassing protocol inspection by leveraging pre-filter rules
- B. by assigning an inline set interface
- C. by leveraging the ARP to direct traffic through the firewall
- D. by using a BVI and create a BVI IP address in the same subnet as the user segment
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html
NEW QUESTION 141
When do you need the file-size command option during troubleshooting with packet capture?
- A. when capture packets are less than 16 MB
- B. when capture packets exceed 32 MB
- C. when capture packets exceed 10 GB
- D. when capture packets are restricted from the secondary memory
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/troubleshooting_the_system.html
NEW QUESTION 142
Which feature is supported by IRB on Cisco FTD devices?
- A. EtherChannel interface
- B. high-availability cluster
- C. redundant interface
- D. dynamic routing protocol
Answer: D
NEW QUESTION 143
Which command is entered in the Cisco FMC CLI to generate a troubleshooting file?
- A. system support diagnostic-cli
- B. show tech-support chassis
- C. show running-config
- D. sudo sf_troubleshoot.pl
Answer: D
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/sourcefire-defense-center/117663-technote- SourceFire-00.html
NEW QUESTION 144
An organization is migrating their Cisco ASA devices running in multicontext mode to Cisco FTD devices. Which action must be taken to ensure that each context on the Cisco ASA is logically separated in the Cisco FTD devices?
- A. Add a native instance to distribute traffic to each Cisco FTD context.
- B. Configure a container instance in the Cisco FTD for each context in the Cisco ASA.
- C. Configure the Cisco FTD to use port channels spanning multiple networks.
- D. Add the Cisco FTD device to the Cisco ASA port channels.
Answer: B
NEW QUESTION 145
Which two statements about bridge-group interfaces in Cisco FTD are true? (Choose two.)
- A. The BVI IP address must be in a separate subnet from the connected network.
- B. Bridge groups are supported only in transparent firewall mode.
- C. Each directly connected network must be on the same subnet.
- D. Bridge groups are supported in both transparent and routed firewall modes.
- E. Bidirectional Forwarding Detection echo packets are allowed through the FTD when using bridge-group members.
Answer: B,E
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html
NEW QUESTION 146
What is a feature of Cisco AMP private cloud?
- A. It disables direct connections to the public cloud.
- B. It supports anonymized retrieval of threat intelligence
- C. It performs dynamic analysis
- D. It supports security intelligence filtering.
Answer: A
NEW QUESTION 147
With Cisco FTD integrated routing and bridging, which interface does the bridge group use to communicate with a routed interface?
- A. bridge group member
- B. bridge virtual
- C. switch virtual
- D. subinterface
Answer: A
NEW QUESTION 148
In a Cisco AMP for Networks deployment, which disposition is returned if the cloud cannot be reached?
- A. unknown
- B. disconnected
- C. clean
- D. unavailable
Answer: D
Explanation:
Section: Integration
Explanation/Reference:
NEW QUESTION 149
Which two types of objects are reusable and supported by Cisco FMC? (Choose two.)
- A. network-based objects that represent FQDN mappings and networks, port/protocol pairs, VXLAN tags, security zones and origin/destination country
- B. network-based objects that represent IP address and networks, port/protocols pairs, VLAN tags, security zones, and origin/destination country
- C. reputation-based objects that represent Security Intelligence feeds and lists, application filters based on category and reputation, and file lists
- D. reputation-based objects, such as URL categories
- E. dynamic key mapping objects that help link HTTP and HTTPS GET requests to Layer 7 application protocols.
Answer: B,C
NEW QUESTION 150
Which two remediation options are available when Cisco FMC is integrated with Cisco ISE? (Choose two.)
- A. port shutdown
- B. host shutdown
- C. quarantine
- D. dynamic null route configured
- E. DHCP pool disablement
Answer: A,C
Explanation:
Section: Integration
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/210524-configure- firepower-6-1-pxgrid-remediati.html
NEW QUESTION 151
Refer to the exhibit An engineer is modifying an access control pokey to add a rule to inspect all DNS traffic that passes through the firewall After making the change and deploying the pokey they see that DNS traffic is not bang inspected by the Snort engine What is the problem?
- A. The rule must specify the security zone that originates the traffic
- B. The action of the rule is set to trust instead of allow.
- C. The rule is configured with the wrong setting for the source port
- D. The rule must define the source network for inspection as well as the port
Answer: A
NEW QUESTION 152
An engineer is attempting to add a new FTD device to their FMC behind a NAT device with a NAT ID of ACME001 and a password of Cisco388267669. Which command set must be used in order to accomplish this?
- A. configure manager add <FMC IP> ACME0O1 <registration key>
- B. configure manager add ACME001 <registration key> <FMC IP>
- C. configure manager add DONTRESOLVE <FMC IP> AMCE001 <registration key>
- D. configure manager add <FMC IP> registration key> ACME001
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/firesight-management-center/118596-configure-firesight-00.html
NEW QUESTION 153
An engineer is troubleshooting a file that is being blocked by a Cisco FTD device on the network.
The user is reporting that the file is not malicious.
Which action does the engineer take to identify the file and validate whether or not it is malicious?
- A. Use FMC file analysis to look for the file and select Analyze to determine its disposition.
- B. Use the context explorer to find the file and download it to the local machine for investigation.
- C. Right click the connection event and send the file to AMP for Endpoints to see if the hash is malicious.
- D. identify the file in the intrusion events and submit it to Threat Grid for analysis.
Answer: D
NEW QUESTION 154
When do you need the file-size command option during troubleshooting with packet capture?
- A. when capture packets are less than 16 MB
- B. when capture packets exceed 32 MB
- C. when capture packets exceed 10 GB
- D. when capture packets are restricted from the secondary memory
Answer: B
NEW QUESTION 155
With Cisco Firepower Threat Defense software, which interface mode must be configured to passively receive traffic that passes through the appliance?
- A. inline set
- B. passive
- C. routed
- D. inline tap
Answer: B
NEW QUESTION 156
Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)
- A. MD5 authentication to OSPF packets
- B. area boundary router type 1 LSA filtering
- C. OSPFv2 with IPv6 capabilities
- D. SHA authentication to OSPF packets
- E. virtual links
Answer: B,E
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/ospf_for_firepower_threat_defense.html
NEW QUESTION 157
......
CCNP Security Free Certification Exam Material from ExamCost with 225 Questions: https://pass4sure.examcost.com/300-710-practice-exam.html
