Cisco 300-710 Dumps - The Sure Way To Pass Exam
300-710 Exam Questions (Updated 2024) 100% Real Question Answers
NEW QUESTION # 160
When deploying a Cisco ASA Firepower module, an organization wants to evaluate the contents of the traffic without affecting the network. It is currently configured to have more than one instance of the same device on the physical appliance Which deployment mode meets the needs of the organization?
- A. inline mode
- B. passive tap monitor-only mode
- C. passive monitor-only mode
- D. inline tap monitor-only mode
Answer: C
NEW QUESTION # 161
A company has many Cisco FTD devices managed by a Cisco FMC. The security model requires that access control rule logs be collected for analysis. The security engineer is concerned that the Cisco FMC will not be able to process the volume of logging that will be generated. Which configuration addresses this concern?
- A. Send Cisco FTD connection events and security events to a cluster of Cisco FMC devices for storage and analysis.
- B. Send Cisco FTD connection events directly to a SIEM system and forward security events from Cisco FMC to the SIEM system for storage and analysis.
- C. Send Cisco FTD connection events and security events directly to SIEM system for storage and analysis.
- D. Send Cisco FTD connection events and security events to Cisco FMC and configure it to forward logs to SIEM for storage and analysis.
Answer: C
NEW QUESTION # 162
Which Cisco Firepower feature is used to reduce the number of events received in a period of time?
- A. correlation
- B. suspending
- C. thresholding
- D. rate-limiting
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa- firepower-module-user-guide-v541/Intrusion-Global-Threshold.html
NEW QUESTION # 163
A VPN user is unable to conned lo web resources behind the Cisco FTD device terminating the connection.
While troubleshooting, the network administrator determines that the DNS responses are not getting through the Cisco FTD What must be done to address this issue while still utilizing Snort IPS rules?
- A. Modify the Snort rules to allow legitimate DNS traffic to the VPN users.
- B. Decrypt the packet after the VPN flow so the DNS queries are not inspected
- C. Disable the intrusion rule threshes to optimize the Snort processing.
- D. Uncheck the "Drop when Inline" box in the intrusion policy to allow the traffic.
Answer: A
NEW QUESTION # 164
Which command should be used on the Cisco FTD CLI to capture all the packets that hit an interface?
- A. capture WORD
- B. capture
- C. capture-traffic
- D. configure coredump packet-engine enable
Answer: C
NEW QUESTION # 165
What is a feature of Cisco AMP private cloud?
- A. It disables direct connections to the public cloud.
- B. It supports anonymized retrieval of threat intelligence
- C. It performs dynamic analysis
- D. It supports security intelligence filtering.
Answer: A
NEW QUESTION # 166
An engineer is reviewing a ticket that requests to allow traffic for some devices that must connect to a server over 8699/udp. The request mentions only one IP address, 172.16.18.15, but the requestor asked for the engineer to open the port for all machines that have been trying to connect to it over the last week. Which action must the engineer take to troubleshoot this issue?
- A. Use the context explorer to see the destination port blocks
- B. Filter the connection events by the source port 8699/udp.
- C. Use the context explorer to see the application blocks by protocol.
- D. Filter the connection events by the destination port 8699/udp.
Answer: D
NEW QUESTION # 167
What is an advantage of adding multiple inline interface pairs to the same inline interface set when deploying an asynchronous routing configuration?
- A. The interfaces disable autonegotiation and interface speed is hard coded set to 1000 Mbps.
- B. The interfaces are automatically configured as a media-independent interface crossover.
- C. Allows traffic inspection to continue without interruption during the Snort process restart.
- D. Allows the IPS to identify inbound and outbound traffic as part of the same traffic flow.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config-guide-v601/fpmc-config-guide-v60_chapter_01011010.pdf
NEW QUESTION # 168
Which firewall design allows a firewall to forward traffic at layer 2 and layer 3 for the same subnet?
- A. transparent mode
- B. Cisco Firepower Threat Defense mode
- C. routed mode
- D. integrated routing and bridging
Answer: B
NEW QUESTION # 169
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 170
Which action must be taken on the Cisco FMC when a packet bypass is configured in case the Snort engine is down or a packet takes too long to process?
- A. Enable Inspect Local Router Traffic
- B. Add a Bypass Threshold policy for failures
- C. Configure Fastpath rules to bypass inspection
- D. Enable Automatic Application Bypass
Answer: D
NEW QUESTION # 171
An engineer is configuring a cisco FTD appliance in IPS-only mode and needs to utilize fail-to-wire interfaces. Which interface mode should be used to meet these requirements?
- A. routed
- B. inline set
- C. transparent
- D. passive
Answer: B
NEW QUESTION # 172
A network engineer is configuring URL Filtering on Firepower Threat Defense. Which two port requirements on the Firepower Management Center must be validated to allow communication with the cloud service? (Choose two.)
- A. outbound port TCP/8080
- B. outbound port TCP/443
- C. inbound port TCP/443
- D. inbound port TCP/80
- E. outbound port TCP/80
Answer: B,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/SecurityInternet_Accessand_Communication_Ports.html
NEW QUESTION # 173
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
Explanation
Explanation
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/firepower_management_center_high_availability.html#id_32288
NEW QUESTION # 174
A company wants a solution to aggregate the capacity of two Cisco FTD devices to make the best use of resources such as bandwidth and connections per second. Which order of steps must be taken across the Cisco FTDs with Cisco FMC to meet this requirement?
- A. Configure the Cisco FTD interfaces, add members to FMC, configure cluster members in FMC, and create cluster in Cisco FMC.
- B. Configure the Cisco FTD interfaces and cluster members, add members to Cisco FMC. and create the cluster in Cisco FMC.
- C. Add members to the Cisco FMC, configure Cisco FTD interfaces, create the cluster in Cisco FMC, and configure cluster members in Cisco FMC.
- D. Add members to Cisco FMC, configure Cisco FTD interfaces in Cisco FMC. configure cluster members in Cisco FMC, create cluster in Cisco FMC. and configure cluster members in Cisco FMC.
Answer: C
NEW QUESTION # 175
Which interface type allows packets to be dropped?
- A. passive
- B. TAP
- C. inline
- D. ERSPAN
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/200908-configuring-firepower-threat-defense-int.html
NEW QUESTION # 176
Refer to the exhibit.
A systems administrator conducts a connectivity test to their SCCM server from a host machine and gets no response from the server. Which action ensures that the ping packets reach the destination and that the host receives replies?
- A. Modify the Snort rules to allow ICMP traffic.
- B. Configure a custom Snort signature to allow ICMP traffic after Inspection.
- C. Create an access control policy rule that allows ICMP traffic.
- D. Create an ICMP allow list and add the ICMP destination to remove it from the implicit deny list.
Answer: C
NEW QUESTION # 177
An engineer must configure the firewall to monitor traffic within a single subnet without increasing the hop count of that traffic. How would the engineer achieve this?
- A. Set up Cisco Firepower as managed by Cisco FDM
- B. Configure Cisco Firepower as a transparent firewall
- C. Configure Cisco Firepower in FXOS monitor only mode.
- D. Set up Cisco Firepower in intrusion prevention mode
Answer: B
NEW QUESTION # 178
Which Cisco Firepower rule action displays an HTTP warning page?
- A. Allow with Warning
- B. Interactive Block
- C. Monitor
- D. Block
Answer: B
NEW QUESTION # 179
Which two remediation options are available when Cisco FMC is integrated with Cisco ISE? (Choose two.)
- A. host shutdown
- B. dynamic null route configured
- C. DHCP pool disablement
- D. quarantine
- E. port shutdown
Answer: D,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/210524-configure- firepower-6-1-pxgrid-remediati.html
NEW QUESTION # 180
When creating a report template, how can the results be limited to show only the activity of a specific subnet?
- A. Add a Table View section to the report with the Search field defined as the network in CIDR format.
- B. Select IP Address as the X-Axis in each section of the report.
- C. Add an Input Parameter in the Advanced Settings of the report, and set the type to Network/IP.
- D. Create a custom search in Firepower Management Center and select it in each section of the report.
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/FireSIGHT-System- UserGuide-v5401/Reports.html#87267
NEW QUESTION # 181
An engineer is attempting to create a new dashboard within the Cisco FMC to have a single view with widgets from many of the other dashboards. The goal is to have a mixture of threat and security related widgets along with Cisco Firepower device health information Which two widgets must be configured to provide this information? (Choose two.)
- A. Appliance Status
- B. Current Sessions
- C. Correlation Information
- D. Network Compliance
- E. Intrusion Events
Answer: C,E
NEW QUESTION # 182
With Cisco FTD integrated routing and bridging, which interface does the bridge group use to communicate with a routed interface?
- A. subinterface
- B. switch virtual
- C. bridge group member
- D. bridge virtual
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/transp
NEW QUESTION # 183
Which command is run at the CLI when logged in to an FTD unit, to determine whether the unit is managed locally or by a remote FMC server?
- A. show configuration session
- B. system generate-troubleshoot
- C. show managers
- D. show running-config | include manager
Answer: C
NEW QUESTION # 184
A network administrator is configuring a site-to-site IPsec VPN to a router sitting behind a Cisco FTD. The administrator has configured an access policy to allow traffic to this device on UDP 500, 4500, and ESP VPN traffic is not working. Which action resolves this issue?
- A. Modify the NAT policy to use the interface PAT.
- B. Change the access policy to allow all ports.
- C. Set the allow action in the access policy to trust.
- D. Enable IPsec inspection on the access policy.
Answer: D
NEW QUESTION # 185
......
Cisco Firepower NGFW is one of the most widely used security solutions in the market, offering advanced threat protection and network visibility across physical, virtual, and cloud environments. As cyber threats continue to evolve and become more sophisticated, organizations need skilled professionals who can implement, manage, and optimize Firepower NGFW solutions to protect their networks and assets. The 300-710 exam validates the knowledge and skills required for this critical role, including configuring and troubleshooting Firepower NGFW devices, implementing access control policies, and using advanced security features to detect and prevent cyber attacks.
Cisco 300-710 certification exam, also known as Securing Networks with Cisco Firepower, is an advanced-level certification exam that focuses on the knowledge and skills required to configure, deploy and manage Cisco Firepower Next-Generation Firewall (NGFW) solutions. Securing Networks with Cisco Firepower certification is designed for network security professionals who want to demonstrate their expertise in securing network infrastructures using Cisco Firepower technology.
Understanding the General Outline
Cisco 300-710 is a well-structured exam that aims at directional learning. It is divided into four main domains, and each of them is focused on a different skill set and imparts updated cognizance.
Pass Cisco 300-710 Exam Quickly With ExamCost: https://pass4sure.examcost.com/300-710-practice-exam.html
