Practice HPE6-A72 Questions With Certification guide Q&A from Training Expert ExamCost
Free HP HPE6-A72 Test Practice Test Questions Exam Dumps
HPE6-A72 Exam is an excellent opportunity for IT professionals who want to specialize in Aruba Certified Switching Associate. Aruba Certified Switching Associate Exam certification is globally recognized and can open up numerous career opportunities in different industries. HPE6-A72 exam covers a range of topics, including basic switch configuration, VLANs, link aggregation, and spanning tree protocol. With the right preparation, IT professionals can pass the exam and acquire the skills and knowledge necessary to manage and configure ArubaOS-Switches effectively.
NEW QUESTION # 26
Click on the colored box that corresponds with the line that best represents Unicast traffic flow.
Answer:
Explanation:
NEW QUESTION # 27
Which command can be used to find the serial number of an Aruba OS-CX switch?
- A. The command inventory
- B. The command show system
- C. The command version
- D. The command show running-configuration
Answer: B
NEW QUESTION # 28
Which two statements accurately describe the features of NetEdit? (Choose two.)
- A. NetEdit can perform configuration and compliance validation.
- B. NetEdit can be used to configure and validate any third-party device that supports SSH and REST access.
- C. NetEdit can run on a mobile device using Android or Apple IOS.
- D. NetEdit supports viewing and editing multiple devices using a single deployment plan.
- E. NetEdit includes trial licensing for up to 10 nodes.
Answer: A,D
NEW QUESTION # 29
Which network category applies to a SOHO internal network?
- A. SD-WAN
- B. Internet
- C. LAN
- D. WAN
Answer: B
NEW QUESTION # 30
What are the benefits of a 3-Tier design over a 2-Tier? (Choose two.)
- A. Gaining the flexibility to connect the Data-Center to any Access layer switch.
- B. Offloading processing from the Core without routing at the Access layer.
- C. Can use lower speed links between Core to Aggregation and Aggregation to Access given the use of an Aggregation layer.
- D. Lowering the cost of a deployment due to needing less switches overall.
- E. Better scalability in a campus with a large number of buildings.
Answer: B,E
NEW QUESTION # 31
What is the Link Layer Discovery Protocol?
- A. an Aruba proprietary discovery protocol supported in all Aruba switches along with Cisco Discovery Protocol or CDP
- B. a discovery protocol used between Layer 3 devices to determine routes within a single autonomous system
- C. a standardized protocol for communicating directly-connected device information and capabilities.
- D. a standardized IPv6 neighbor discovery protocol used to replace the ARP and broadcast mechanism used in IPv4
Answer: C
NEW QUESTION # 32
Refer to the exhibit.
The Aruba 8400 in the exhibit is member 2 of a VSX stack.
Which command will enter the interface sub configuration mode for the port, indicated by the orange square?
- A. 8400(config)# interface 2/4/15
- B. 8400(config)# interface 2/3/17
- C. 8400(config)# interface 1/7/16
- D. 8400(config)# interface 1/4/15
Answer: A
NEW QUESTION # 33
What is the process where a compute device converts logical data bits into the correct physical representation depending on the media?
- A. Demodulation
- B. Modulation
- C. Encapsulation
- D. Propagation
Answer: C
NEW QUESTION # 34
What is Deep Packet Inspection?
- A. a concept that applies to firewalls, when examining packets only up through Layer 4
- B. a function of Policy Based Routing that examines the entire IPv4 header to forward traffic based on factors other than destination address
- C. a firewall process of examining the packet header all the way to Layer 7 in order to determine if the packet should be permitted or denied
- D. a machine learning method of packet inspection for the purpose of choosing which dynamic routing protocol to automatically assign
Answer: C
NEW QUESTION # 35
Click on the colored box that corresponds with the line that best represents Multicast traffic flow.
Answer:
Explanation:
Explanation:
Blue Box
NEW QUESTION # 36
What are the commands to disable SSH and HTTPS services from the default VRF?
- A. Core-1# no ssh server vrf default Core-1# no https-server vrf default
- B. Core-1(config)# no ssh server vrf default Core-1(config)# no https-server vrf default
- C. Core-1(config)# no ssh server enable Core-1(config)# no https-server enable
- D. Core-1(config)# no ssh server Core-1(config)# no https-server
Answer: B
NEW QUESTION # 37
ServiceOS login: admin
SVOS> password
Enter password: ********
Confirm password: ********
The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.
What is the default password that is required for the admin account while under the Service OS console?
- A. "password"
- B. "forgetme!"
- C. No password is set for this account.
- D. The same login password that has lost originally.
Answer: B
NEW QUESTION # 38
Which two options are correct regarding the IEEE 802.11ax standard? (Choose two.)
- A. operates in both the 2.4GHz and 5GHz radios bands
- B. allows transmissions of up to 4.8Gbps
- C. is the first WLAN standard to no longer use electromagnetic signals to transmit data
- D. operates only in the 5GHz similar to 802.11ac
- E. is an emerging satellite connection standard to allow wireless access anywhere in the world
Answer: A,B
Explanation:
Explanation/Reference:
NEW QUESTION # 39
Which two options are the Layer 2 protocols? (Choose two.)
- A. 802.11af
- B. RIP
- C. 802.1Q
- D. STP
- E. IPSec
Answer: C,D
NEW QUESTION # 40
With what other technology does Half Duplex communication closely match?
- A. a mobile phone call
- B. point-to-point connections between two switches allowing concurrent transmit and receive
- C. a pair of fiber optic strands allowing transmit on one and receive on the other at the same time
- D. CB radio using push-to-talk
Answer: D
NEW QUESTION # 41
Which command will suppress LLDP messages from egressing on a given port while still allowing LLDP to be enabled on the switch?
- A. switch(config-if)# no lldp transmit
- B. switch(config)# no lldp
- C. switch(config-if)# no lldp interface (port) transmit
- D. switch(config-if)# no lldp receive
Answer: A
NEW QUESTION # 42
The following command is issued:
Switch# checkpoint rollback start
What is the result?
- A. The command will fail because it is incomplete.
- B. The command will fail because rollback commands must be issued from global-config mode.
- C. The switch will revert the running-configuration to the checkpoint called 'start1 without a reboot.
- D. The switch will use the checkpoint 'rollback1 as the starting configuration on next reboot.
Answer: C
NEW QUESTION # 43
Refer to the exhibit.
What change on Core-1 will result in a successful ping to 10.1.1.254 from the management interface?
- A. Use the command ping 10.1.1.254/24
- B. Use the command ping 10.1.1.254 vrf mgmt
- C. The destination 10.1.1.254 requires configuring a static route
- D. Change the Core-1 management address to 10.1.1.1/25 first
Answer: B
NEW QUESTION # 44
You have completed a successful VSF stack between two switches.
Without manually assigning a backup switch, what is the expected output when issuing a show vsf command?
- A. Option B
- B. Option D
- C. Option A
- D. Option C
Answer: B
NEW QUESTION # 45
Which two options are the Layer 3 Routing protocols? (Choose two.)
- A. MPLS
- B. LLDP
- C. BGP
- D. 802.3ad
- E. OSPF
Answer: C,E
NEW QUESTION # 46
What command displays information regarding the secondary image installed on an AOS-CX switch?
- A. show version detail
- B. show version
- C. show secondary
- D. show images
Answer: D
NEW QUESTION # 47
......
Prepare Top HP HPE6-A72 Exam Audio Study Guide Practice Questions Edition: https://pass4sure.examcost.com/HPE6-A72-practice-exam.html
