NEW 2022 Certification Sample Questions HPE6-A79 Dumps & Practice Exam
HPE6-A79 Deluxe Study Guide with Online Test Engine
NEW QUESTION 32
Refer to the exhibit.
A network administrator has created AAA profile for the corporate VAP. In addition to the regular Radius based authentication, the administrator needs to be able to disconnect the users from either of the two servers that are part of the "Radius" server group.
What must the administrator do next in order to achieve this goal?
- A. Use the "Radius' server group as both the Accounting Server Group and the RFC 3576 server in the AAA profile.
- B. Use the "Radius" server group as the RADIUS Accounting Server Group in the AAA profile.
- C. Create two new RFC 3576 servers and assign them as the RFC 3576 servers in the AAA profile.
- D. Use the "Radius' server group as the RFC 3576 server in the AAA profile.
Answer: A
NEW QUESTION 33
A network administrator is in charge of a Mobility Master (MM) - Mobility Controller (MC) based WLAN. The administrator has deployed an Airwave Management Platform (AMP) server in order to improve the monitoring capabilities and generate reports and alerts.
The administrator has configured SNMPv3 and Admin credentials on both the MMs and MCs and has created Groups and Folders in the AMP server.
What two additional steps must the administrator do in order to let Airwave monitor the network devices? (Choose two.)
- A. Map the AMP's IP address with a mgmt-config profile in the MM.
- B. Move "New" devices into a group and folder in Airwave.
- C. Manually add each MM. MC and Access Point in the AMP server.
- D. Manually add the Active MM and wait for automatic Discovery.
- E. Set the AMP's IP address and Org string as DHCP option 43.
Answer: A,D
NEW QUESTION 34
Refer to the exhibit.
Based on the output shown in the exhibit, with which Aruba devices has Access-1 established tunnels?
- A. a single standalone MC
- B. a pair of switches running VXLAN
- C. a pair of MCs within a L3 cluster
- D. a pair of standalone MCs
Answer: C
NEW QUESTION 35
Refer to the exhibits.
A user reports slow connectivity to a network administrator when connecting to AP-Garden and suggests that there might be a problem with the WLAN. The user's device supports 802.11n in the 2.4 GHz band. The network administrator finds the user in the Mobility Master (MM) and reviews the output shown in the exhibit.
What can the network administrator conclude after analyzing the data?
- A. 2.4Ghz band is currently congested, therefore a NIC upgrade to 802.11ac or higher is recommended so the user can move to 5Ghz.
- B. 365s are low cost outdoor APs recommended for coverage design only. AP-Garden currently has more clients than recommended and is getting congested.
- C. User's SNR value over time is lower than recommended, therefore he should either get closer to the Access Point or increase the transmit power.
- D. Channel usage is high and though this device has high speed the overall client rate is low on AP-Garden. there could be a few clients monopolizing the airtime on both bands at low speeds.
Answer: B
NEW QUESTION 36
Refer to the exhibit.
A network administrator wants to configure an 802.1x supplicant for a wireless network that includes the following:
* AES encryption
* EAP-MSCHAP v2-based user and machine authentication
* Validation of server certificate in Microsoft Windows 10
The network administrator creates a WLAN profile and selects the change connection settings option. Then the network administrator changes the security type to Microsoft: Protected EAP (PEAP), and enables user and machine authentication under Additional Settings.
What must the network administrator do next to accomplish the task?
- A. Enable user authentication under Settings
- B. Enable server certificate validation under Settings.
- C. Change the security type to Microsoft: Smart Card or other certificate.
- D. Change default RC4 encryption for AES.
Answer: C
NEW QUESTION 37
Refer to the exhibits.
Exhibit 1
Exhibit 2
A network administrator adds a new Mobility Controller (MC) to the production Mobility Master (MM) and deploys APs that start broadcasting the employee SSID in the West wing of the building. Suddenly, the employees report client disconnects. When accessing the MM the network administrator notices that the MC is unreachable, then proceeds to access the MC's console and obtains the outputs shown in the exhibits.
What should the network administrator do next to solve the current problem?
- A. Open a TAC case and send the output of tar crash.
- B. Decommission the MC from the MM, and add it again.
- C. Kill two zombie processes then reboot the MC.
- D. Verify the license pools in the MM.
Answer: D
NEW QUESTION 38
A joint venture between two companies results in a fully functional WLAN Aruba solution. The network administrator uses the following script to integrate the WLAN solution with two radius servers, radius1 and radius2.
While all users authenticate with [email protected] type of credentials, radius1 has user accounts with the domain name portion.
Which additional configuration is required to authenticate corp1.com users with radius1 and corp2 users with radius2?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: A
NEW QUESTION 39
A customer wants a WLAN solution that permits Aps to terminate WPA-2 encrypted traffic from different SSIDs to different geographic locations where non-related IT departments will take care of enforcing security policies. A key requirement is to minimize network congestion, overhead, and delay while providing data privacy from the client to the security policy enforcement point. Therefore, the solution must use the shortest path from source to destination.
Which Aruba feature best accommodates this scenario?
- A. Inter MC S2S IPsec tunnels
- B. Inter MC GRE tunnels
- C. Multizone Aps
- D. RAPs
- E. VIA
Answer: D
NEW QUESTION 40
Refer to the exhibits.
Exhibit 1
Exhibit 2
Exhibit 3
A network administrator wants to allow contractors to access the corporate WLAN named EmployeesNet with the contractor role in VLAN 40. When users connect, they do not seem to get an IP address. After some verification checks, the network administrator confirms the DHCP server (10.254.1.21) is reachable from the Mobility Controller (MC) and obtains the outputs shown in the exhibits.
What should the network administrator do next to troubleshoot this problem?
- A. Permit UDP67 to the contractor role.
- B. Confirm there is an IP pool for VLAN 40.
- C. Configure the DHCP helper address.
- D. Remove the IP address in VLAN 40.
Answer: A
NEW QUESTION 41
A network administrator has deployed an Airwave Management Platform (AMP) server and integrated it with a Mobility Master (MM) - Mobility Controller (MC) based WLAN. The AMP server already has all Aruba Mobility devices including Access Points (APs) in the "UP" devices list.
What are two actions the administrator can execute upon the APs under "Airwave>Devices>Monitor"? (Choose two.)
- A. Run Spectrum Analysis locally.
- B. Invoke MC's show commands for that Access Point.
- C. Re-provision the Access Point.
- D. Open the WebUI of the MC where the AP terminates.
- E. Disable and change the mode of the AP's radios.
Answer: A,B
NEW QUESTION 42
A software development company has 764 employees who work from home. The company also has small offices located in different cities throughout the world. During working hours, they use RAPs to connect to a datacenter to upload software code as well as interact with databases.
In the past two month, cabling issues have occurred connection to the 7240XM Mobility Controller (MC) that runs ArubaOS 8 and terminates the RAPs. These RAPs disconnect, affecting the users connected to the RAPs. This also causes problems with code uploads and database synchronizations. Therefore, the company decides to add a second 7240XM controller for redundancy.
How should the network administrator deploy both controllers in order to provide the redundancy while preventing failover events from disconnecting users?
- A. Connect both controllers with common VLANs. and configure LMS/BLMS values equal to public addresses in the internet VLAN.
- B. Connect both controllers with different VLANs. and create an L2-connected cluster using public addresses in the internet VLAN.
- C. Connect both controllers with common VLANs. and create an L2-connected cluster using public addresses in the internet VLAN.
- D. Connect both controllers with common VLANs. and create an HA fast failover group with public addresses in the internet VLAN.
Answer: D
NEW QUESTION 43
A network administrator wants to receive a warning level alarm every time the noise floor rises above -82 dBm on any of the AP radios.
Which alarm definition must the network administrator create to accomplish this?
Answer:
Explanation:
NEW QUESTION 44
Refer to the exhibits.
Exhibit 1
Exhibit 2
A network administrator integrates a current Mobility Master (MM) - Mobility Controller (MC) deployment with a RADIUS server to authenticate a wireless user, the network administrator realizes that the client machine is not failing into the it_department role, as shown the exhibits.
Which configuration is required to map the users into the proper role, based on standard attributes returned by the RADIUS server in the Access Accept message?
- A. aaa server-group ClearPass
set role condition Filter-Id equals it_department set-value it-role - B. aaa server-group Corp-employee
set role condition Filter-Id equals it-role set-value it_department - C. aaa server-group Corp-employee
set role condition Filter-Id value-of - D. aaa server-group Corp-Network
set role condition Filter-Id equals it-role set-value it_department - E. aaa server-group Corp-Network
set role condition Filter-Id equals it_department set-value it-role
Answer: B
NEW QUESTION 45
A network administrator has updated the ArubaOS code of a standalone Mobility Controller (MC) that is used for User-Based Tunneling (UBT) to a newer early release. Ever since the MC seems to reject PAPI sessions from the switch with the 10.1.10.10 IP address. Also the controller's prompt is now followed by a star mark: "(MC_VA) [mynode] *#" When opening a support ticket, an Aruba TAC engineer asks the administrator to gather the crash logs and if possible replicate UBT connection attempts from the switch while running packet captures of PAPI traffic on the controller and obtain the PCAP files. The administrator has a PC with Wireshark and TFTP server using the 10.0.20.20 IP address.
What commands must the administrator issue to accomplish these requests? (Choose two.)
- A. Option B
- B. Option D
- C. Option C
- D. Option E
- E. Option A
Answer: A,D
NEW QUESTION 46
Refer to the exhibit.
A network administrator has recently enabled WMM on the VAP's SSID profile and enabled UCC Skype4B ALG at the Mobility Master level. During testing, some voice and video conference calls were made, and it was concluded that the call quality has dramatically improved. However, end to end information isn't displayed in the call's details. Also, Skype4B app-sharing's performance is poor at times.
What must the administrator do next in order to enable end to end call visibility and QoS correction to app-sharing service?
- A. Enable the App-sharing ALG profile at both MM and MD hierarchy levels.
- B. Enable UCC monitoring on the "default-controller' mgmt.-server profile.
- C. Deploy the SDN API Software in the Skype4B Solution and point to the MM.
- D. Increase the app-sharing DSCP value in the Skype4B ALG profile.
Answer: A
NEW QUESTION 47
Refer to the exhibit.
Based on the output shown in the exhibit, which wireless connection phase has just completed?
- A. MAC Authentication and 4-way handshake
- B. 802.11 enhanced open association
- C. L3 authentication and encryption
- D. L2 authentication and encryption
Answer: C
NEW QUESTION 48
Refer to the exhibit.
After deploying several cluster pairs, the network administrator notices that all APs assigned to Cluster1 communicate with MC1 instead of being distributed between members of the cluster. Also, no IP addresses are shown under the Standby IP column.
What should the network administrator do to fix this situation?
- A. Apply the same cluster profile to both members.
- B. Rename the cluster profile as "CLUSTER1".
- C. Enable Cluster AP load balancing.
- D. Place MCs at the same hierarchical group level.
Answer: B
NEW QUESTION 49
......
HP HPE6-A79 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
HPE6-A79 dumps review - Professional Quiz Study Materials: https://pass4sure.examcost.com/HPE6-A79-practice-exam.html
