NACE NACE-CIP1-001 Real 2024 Braindumps Mock Exam Dumps
NACE-CIP1-001 Exam Questions | Real NACE-CIP1-001 Practice Dumps
Do you know anything about the NACE-CIP1-001 Exam?
NACE CIP Level 1 is an industry-recognized certification program. It allows individuals to obtain a certificate that certifies them as knowledgeable and competent coatings inspectors. It is the first step towards becoming a Certified Professional Coatings Inspector. The NACE CIP1-001 exam is a good way to show your ability to inspect the coating industry. The NACE-CIP1-001 exam is a challenging test. The candidate must be well prepared in order to crack the NACE-CIP1-001 exam. Purchase is NACE-CIP1-001 Dumps and save your time. Tank lining is a crucial aspect of any industrial plant. For the safety of the workers, it is very important to use the best lining materials.
NACE-CIP1-001 certification exam is an important examination for individuals who are looking to establish their credentials as coating inspectors. Coating Inspector Level 1 certification is awarded by NACE International, which is a globally recognized organization that specializes in corrosion prevention and control. Coating Inspector Level 1 certification is designed to test the knowledge and skills of individuals in the field of coating inspection, and it is a valuable asset for professionals in the industry.
NEW QUESTION # 22
Osmotic blistering is most likely to occur as a result of
- A. applying tine coating too thin.
- B. overcoating a surface contaminated with chemical salts.
- C. inadequate anchor pattern/surface profile.
- D. airless spray application
Answer: D
NEW QUESTION # 23
You are the NACE Coating Inspector on an exterior job where the contractor is not using any environmental controls, For the last several hours your reading; indicate the relative humidity is rising and the substrate temperature is dropping. The sky is clouding over and the weather forecast is for evening showers. It is now 4 PM, your readings indicate you have minimally acceptable environmental conditions, however if the current trend continues, you expect to be outside specified conditions soon. The contractor advises you he is going to mix up the next full kit to complete his for the day.
Your FIRST preformed course of action is to:
- A. Advise the Contractor he can proceed
- B. Call your supervisor
- C. Advise the Contractor of your readings
- D. Advise the Contractor he cannot proceed
Answer: C
NEW QUESTION # 24
NACE SP 0178 is a standard for:
- A. Structural steel to be coated for Atmospheric Service
- B. Tanks and Vessels to, be Lined for Immersion Service
- C. Stainless steel pipe to be Externally Coated
- D. Tanks and Vessels to be Externally Coated
Answer: B
NEW QUESTION # 25
Stripe coats are generally applied to:
- A. Edges and corners
- B. Complex geometric shapes
- C. Welds
- D. a), b), and c)
Answer: D
NEW QUESTION # 26
Corrosion generally occurs at which of the following sites:
- A. Anode
- B. Metallic pathway
- C. Electrolyte
- D. Cathode
Answer: A
NEW QUESTION # 27
According to SSPC PA 2 a Spot Measurement is:
- A. The average of gauge readings taken in a 4cm (1.5 inch) circle
- B. A single gauge reading
- C. The average of all spot measurements in a given area
- D. The overall average of all readings
Answer: A
NEW QUESTION # 28
You are asked to be the only coating inspector on a small bridge recoating job where existing coating contains lead. The owners' representative has supplied you with the local code governing the removal and disposal of lead based coatings, however upon reading the document you having great deal of difficulty understanding the technical language.
As a NACE CIP Level 1 Inspector your preferred course of action is to:
- A. Hire a third patty to assist you in understanding the document
- B. Minimize your lack of understanding and go ahead with the inspection task to the best of your ability
- C. Carefully review the document and do the best you can
- D. Advise the owners' representative of your lack of knowledge in this area
Answer: C
NEW QUESTION # 29
If the specifier does not identify a restriction level in accordance with SSPC PA 2, the default restriction level is:
- A. Level 2
- B. Level 1
- C. Level 3
- D. Level 4
Answer: C
NEW QUESTION # 30
ASTM Standards are applicable:
- A. In Asia
- B. When specified
- C. In the USA
- D. In North America
Answer: B
NEW QUESTION # 31
An inspectors personal log book should contain:
- A. No comments regarding the application team
- B. Subjective comments re ding the application team
- C. The inspector's personal opinions of the application team
- D. Objective comments regarding the application work
Answer: A
NEW QUESTION # 32
ISO SA 2.5 is defined as:
- A. Light Blast Cleaning
- B. Very Thorough Blast Cleaning
- C. Near White Metal Blasting
- D. Thorough Blast Cleaning
Answer: B
NEW QUESTION # 33
Excessive working of the surface with a power grinder can be detrimental because excessive burnishing
- A. damages structural elements thereby speeding up the corrosion process.
- B. scratches the surface too deeply resulting in uneven coating application
- C. develops a good anchor profile resulting in uneven coating application.
- D. develops a polished surface, which is a poor anchor profile for most coatings
Answer: D
NEW QUESTION # 34
Using SSPC Vis 1 as a guide when performing a visual inspection of a steel surface prior to surface preparation a NACE Inspector would assign which designations to the surface condition:
- A. Rust Grades A-D
- B. Surface Conditions E-G
- C. Surface Condition H
- D. Rust Grades 1-4
Answer: A
NEW QUESTION # 35
Dew point is the temperature at which
- A. the air is saturated.
- B. condensation occurs.
- C. water freezes.
- D. humidity decreases
Answer: B
NEW QUESTION # 36
Owners hire NACE Inspectors' with the expectation that:
- A. a) and c)
- B. The Inspector will improve job flow and schedule
- C. The inspection cost will be offset by an improvement in service life
- D. The Inspector will make a meaningful technical contribution to the job
Answer: A
NEW QUESTION # 37
You are the NACE Inspector on a job where the Owner's specification requites you to perform a twice daily check of blast pressure at the nozzle. It is now day 30 on the job and all of your readings have been within compliance. The Contractor complains that these checks taking up much time and in view of the compliant results they are unnecessary.
Your FIRST preferred course of action is to:
- A. Keep doing the checks and consult the Owner's representative for direction
- B. Keep doing the checks regardless
- C. Skip the checks and just record the same readings as you have been getting
- D. Skip the checks as you are. confident the blast pressure is OK
Answer: A
NEW QUESTION # 38
Which one of the following documents is the best source for coating technical data:
- A. Application Guidelines
- B. Safety Data Sheet;
- C. Technical Data Sheet
- D. Specification
Answer: C
NEW QUESTION # 39
The NACE Inspector should perform tests for soluble salts:
- A. Prior to coating application
- B. Prior to surface preparation
- C. When specified
- D. After surface preparation
Answer: C
NEW QUESTION # 40
......
Verified NACE-CIP1-001 Exam Dumps Q&As - Provide NACE-CIP1-001 with Correct Answers: https://pass4sure.examcost.com/NACE-CIP1-001-practice-exam.html
