Apr-2025 Pass Cisco 300-415 Exam in First Attempt Easily [Q212-Q230]

Apr-2025 Pass Cisco 300-415 Exam in First Attempt Easily

Free 300-415 Exam Files Downloaded Instantly 100% Dumps & Practice Exam

Obtaining the Cisco 300-415 certification demonstrates that an IT professional has the skills and knowledge required to implement Cisco SD-WAN solutions. Implementing Cisco SD-WAN Solutions certification can lead to various career opportunities, such as network engineer, network administrator, and network architect. It also validates the candidate's expertise in one of the most in-demand networking technologies in the industry.

NEW QUESTION # 212
An administrator must deploy the controllers using the On-Prem method while vManage can access the PnP portal from inside How are the two WAN Edge authorized allowed lists to be made available to vManage? (Choose two)

A. Option B
B. Option D
C. Option C
D. Option A

Answer: A,D

Explanation:
https://sdwan-docs.cisco.com/Product_Documentation/vManage_Help/Release_18.4/Configuration/Devices

NEW QUESTION # 213
An enterprise is continuously adding new sites to its Cisco SD-WAN network. It must configure any cached routes flushed when OMP peers have lost adjacency Which configuration allows the cached OMP routes to be flushed after every 24 hours from its routing table?

A. Option B
B. Option D
C. Option C
D. Option A

Answer: A

NEW QUESTION # 214
Which plane assists in the automatic onboarding of the SD-WAN routers into the SD-WAN overlay?

A. Data
B. Management
C. Orchestration
D. Control

Answer: C

Explanation:

NEW QUESTION # 215
Which two products that perform lifecycle management for virtual instances are supported by WAN Edge cloud routers? (Choose two.)

A. Azure
B. IBM Cloud
C. VMware vCenter
D. OpenStack
E. AWS

Answer: C,D

Explanation:
Explanation
https://www.cisco.com/c/en/us/solutions/collateral/enterprise-networks/sd-wan/nb-07-cloud-router-data-sheet-cte

NEW QUESTION # 216
What are the two components of an application-aware firewall? (Choose two.)

A. zone pair
B. lists
C. firewall policy
D. sequence
E. default action

Answer: A,C

Explanation:
Two components that are valid within the options here are:
- Zone Pair
- Firewall Policy
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/security/vedge-20-x/security- book/ent-firewall-app-aware.pdf

NEW QUESTION # 217
Which configuration defines the groups of interest before creation of the access list or route map?

Answer: B

NEW QUESTION # 218
Drag and Drop Question
Drag and drop the phases of TrustSec from the left onto the targets on the right. Not all options are used.

Answer:

Explanation:

Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_cts/configuration/xe-16/sec-usr-cts-xe-
16-book/sec-usr-cts-xe-16-book_chapter_01101.pdf

NEW QUESTION # 219
What is the default value for the Multiplier field of the BFD basic configuration in vManage?

A. 0
B. 1
C. 2
D. 3

Answer: C

NEW QUESTION # 220

Refer to the exhibit Which command allows traffic through the IPsec tunnel configured in VPN 0?

A. service local
B. service netsvc1 vpn 1
C. service FW address 1.1.1.1
D. service netsvc1 address 1.1.1.1

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/vedge-20-x/policies-book/service-ch

NEW QUESTION # 221
How is multicast routing enabled on devices in the Cisco SD-WAN overlay network?

A. The vSmart controller originates multicast service routes to the WAN Edge routers via OMP, which then forwards joins for requested multicast groups based on IGMP v1 or v2 toward the source or PIM-RP as specified in the original PIM join message.
B. The WAN Edge routers originate multicast service routes to the vSmart controller via OMP, which then forwards joins for requested multicast groups based on IGMP v2 or v3 toward the source or PIM-RP as specified in the original PIM join message.
C. The vSmart controller originates multicast service routes to the WAN Edge routers via OMP, which then forwards joins for requested multicast groups based on IGMP v2 or v3 toward the source or PIM-RP as specified in the original PIM join message.
D. The WAN Edge routers originate multicast service routes to the vSmart controller via OMP, which then forwards joins for requested multicast groups based on IGMP v1 or v2 toward the source or PIM-RP as specified in the original PIM join message.

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/routing/ios-xe-17/routing- book-xe/m-multicast-routing.html

NEW QUESTION # 222
Refer to the exhibit. Which configuration stops Netconf CLI logging on WAN Edge devices during migration?

A. Option B
B. Option D
C. Option C
D. Option A

Answer: A

Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/command/sdwan-cr-book/config-cmd.html#wp3867250313

NEW QUESTION # 223
Which command verifies a policy that has been pushed to the vEdge router?

A. vSmart# show running-config policy
B. vSmart# show running-config apply-policy
C. vEdge#show running-config data policy
D. vEdge#show policy from-vsmart

Answer: C

NEW QUESTION # 224
When a WAN Edge device joins the SD-WAN overlay, which Cisco SD-WAN components orchestrates the connection between the WAN Edge device and a vSmart controller?

A. vManage
B. OMP
C. APIC-EM
D. vBond

Answer: D

Explanation:

NEW QUESTION # 225
Which command verifies a policy that has been pushed to the vEdge router?

A. vEdge# show running-config data policy
B. vSmart# show running-config policy
C. vEdge# show policy from-vsmart
D. vSmart# show running-config apply policy

Answer: C

Explanation:
Section: Policies
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/vedge/policies-book.pdf

NEW QUESTION # 226
Which timer specifies information in the cache after all OMP sessions are lost at location S0123T4E56F78?

A. hold time
B. advertisement interval
C. EOR timer
D. graceful restart timer

Answer: D

NEW QUESTION # 227
Whichattributes are configured to uniquely Identify and represent a TLOC route?

A. origin, originator, and preference
B. system IP address link color,and encapsulation
C. site ID,tag, and VPN
D. firewall, IPS, and application optimization

Answer: B

Explanation:
Explanation
TLOC routes are the logical tunnel termination points on the vEdge routers that connect into a transport network. A TLOC route is uniquely identified and represented by a three-tuple, consisting of system IP address, link color, and encapsulation (Generic Routing Encapsulation [GRE] or IPSec). In addition to system IP address, color, and encapsulation, TLOC routes also carry attributes such as TLOC private and public IP addresses, carrier, preference, site ID, tag, and weight. For a TLOC to be considered in an active state on a particular vEdge, an active BFD session must be associated with that vEdge TLOC.
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/SDWAN/CVD-SD-WAN-Design-2018OCT.pdf

NEW QUESTION # 228
Which command disables the logging of syslog messages to the local disk?

A. system logging server remote
B. no system logging disk local
C. system logging disk disable
D. no system logging disk enable

Answer: D

Explanation:
Section: Management and Operations
Explanation/Reference: https://sdwan-docs.cisco.com/Product_Documentation/Software_Features/SD- WAN_Release_16.3/02System_and_Interfaces/08Configuring_System_Logging

NEW QUESTION # 229
Drag and drop the definitions from the left to the configuration on the right.