(2022) NS0-527 Dumps and Practice Test (158 Questions)
Guide (New 2022) Actual Network Appliance NS0-527 Exam Questions
NetApp NS0-527 Exam Certification Details:
| Recommended Training | ONTAP Data Protection Administration (ILT) ONTAP MetroCluster Installation (ILT) ONTAP Data Protection Fundamentals (WBT) |
| Passing Score | 65% |
| Duration | 90 minutes |
| Sample Questions | NetApp NS0-527 Sample Questions |
| Exam Code | NS0-527 NCIE-Data Protection Specialist |
NetApp NS0-527 Exam Topics:
| Section | Objectives |
|---|---|
| NetApp ONTAP Replication Solutions | - Describe SnapMirror technologies - Demonstrate how to administer hybrid cloud data protection solutions |
| NetApp ONTAP Core Data Protection | - Demonstrate knowledge of Snapshot technologies - Describe methods of data protection or data redundancy on an ONTAP system - Demonstrate the use of data efficiencies as it relates to data protection - Describe NetApp ONTAP data protection mechanisms - Demonstrate knowledge of how to troubleshoot protection configurations |
| Data Protection Design Solutions | - Describe how to design data protection solutions - Describe the use of Snapshot technology - Describe network connectivity requirements |
NEW QUESTION 78
A customer wants to set up SNMP to monitor their ONTAP platforms. Because of security reasons, they need strong authentication and data encryption?
In this scenario, which SNMP version satisfies these requirements?
- A. v2c
- B. v1
- C. v2
- D. v3
Answer: D
NEW QUESTION 79
You are performing a routine health check for a customer and need to determine if the disk shelf firmware is up to date. From My AutoSupport, which report would you use?
- A. Visualization
- B. Transition Advisor
- C. Event Viewer
- D. Upgrade Advisor
Answer: A
NEW QUESTION 80
Your customer wants to implement SVM DR, but the customer is not certain whether the identity-preserve parameter should be enabled. The customer explains that the source and destination clusters are in different network subnets.
In this scenario, which SVM DR solution should the customer use?
- A. SVM DR with the identity-preserve parameter enabled and a SnapMirror policy with the discard-configs network parameter.
- B. SVM DR using the identity-preserve parameter disabled and the default SnapMirror policy.
- C. SVM DR with the identity-preserve parameter enabled and the default SnapMirror policy.
- D. SVM DR using the identity-preserve parameter enabled and then administratively take the data LIFs offline on the DR cluster.
Answer: C
NEW QUESTION 81
You have recently installed and set up a new NetApp HCI deployment in your data center that consists of four compute nodes and four storage nodes. Inside this HCI deployment, you are using ONTAP Select for file services. You must protect the data inside the ONTAP Select VM in case of a rack failure.
Which two methods would accomplish this task? (Choose two.)
- A. Using SolidFire real-time remote replication, replicate the hosting volumes to an ONTAP cluster.
- B. Replicate the volumes using SnapMirror from inside the ONTAP Select VM to an existing ONTAP cluster.
- C. Replicate the SVMs from inside the ONTAP Select VM to an existing ONTAP cluster using SVM DR.
- D. Enable FabricPools in the ONTAP Select instance.
Answer: A,C
NEW QUESTION 82
You must determine if there have been any backup problems overnight. Which two reports in OnCommand Unified Manager 6.2 would provide you with the required information?
(Choose two.)
- A. Unresolved Incidents and Risks area
- B. On Command Unified Manager Dashboard
- C. On Command Cluster Events Details
- D. On Command Job Events Details
Answer: B,D
NEW QUESTION 83
Your customer wants to ensure that the SnapMirror relationships are easily managed in a bidirectional, multi-cluster environment. Which version of clustered Data ONTAP would you recommend?
- A. clustered Data ONTAP 8.2.3
- B. clustered Data ONTAP 8.3
- C. clustered Data ONTAP 8.1.4
- D. clustered Data ONTAP 9.1
Answer: D
NEW QUESTION 84
You are upgrading your Data ONTAP cluster from clustered Data ONTAP 8.3 to clustered Data ONTAP 9.1.
Which two actions mustbe performed for the SnapMirror relationships? (Choose two.)
- A. Delete and re-create SnapMirror relationships.
- B. Break existing SnapMirror relationships.
- C. After the upgrade, resynchronize, and resume SnapMirror relationships.
- D. Delete the obsolete SnapMirror Snapshot copies which were created in Data ONTAP 8.3.
Answer: B,C
NEW QUESTION 85
For DR purposes, data must be replicated between on-premises clusters and multiple public clouds. In this scenario, which solution would simplify management?
- A. Cloud Insights
- B. Cloud Sync
- C. Cloud Volumes ONTAP
- D. Cloud Manager
Answer: D
NEW QUESTION 86
A volume has been filled completely by active data and Snapshot copies.
What must you do to make the volume writable again?
- A. Modify the Snapshot reserve.
- B. Delete files in the active file system.
- C. Delete any SnapMirror relationships.
- D. Delete enough Snapshot copies untilspace is available.
Answer: D
NEW QUESTION 87
A client has a 2 TB volume and has enabled the function to automatically delete Snapshot copies in scenarios where capacity will be exceeded. They have set the trigger for this action to the volume | snap_reserve value.
In this scenario, what would trigger this function?
- A. The volume reaches 95% and the space_reserve is at capacity.
- B. The volume reaches 95%.
- C. The volume reaches 98% and the snap_reserve is at capacity.
- D. The snap_reserve reaches capacity.
Answer: C
NEW QUESTION 88
Exhibit:
You are configuring a SnapMirror relationship to capture all daily activities and archive them.
Information about the environment is shown in the exhibit.
In this scenario, how much data must be transferred during the scheduled SnapMirror update?
- A. 150 GB
- B. 50 GB
- C. 250 GB
- D. 200 GB
Answer: D
NEW QUESTION 89
A customer has just purchased a new 2-node AFF A220 cluster running ONTAP 9.7 and moved the older 4- node FAS2650 cluster running ONTAP 9.5 to an off-site location. They want to configure replication to the FAS2650 cluster for both disaster recovery and long-term archiving.
In thisscenario, how would the customer accomplish this task?
- A. Downgrade the AFF A220 cluster to ONTAP 9.5, then configure SnapMirror with type XDP.
- B. Upgrade the FAS2650 cluster to ONTAP 9.7, then configure SnapMirror with type TDP.
- C. Leave the ONTAP versions, then configure SnapMirror with type XDP.
- D. Leave the ONTAP versions, then configure SnapMirror with type DP.
Answer: B
NEW QUESTION 90
Click the Exhibit button.
Your customer wants to protect a volume and replicate it to a secondary volume. The customer has tried to configure this relationship using OnCommand System Manager. Upon reviewing this newly configured relationship, you discover that the configuration does not satisfy the customer's stated requirements.
Referring to the exhibit, what should you do to ensure that the volume is protected?
- A. Resynchronize the relationship.
- B. Initialize the relationship.
- C. Deletethe relationship and recreate it.
- D. Change the schedule to hourly.
Answer: C
NEW QUESTION 91
The primary and secondary clusters are fully configured. You want to set up an inter-cluster SnapMirror relationship.
Which two actions are prerequisite to accomplishing thistask? (Choose two.)
- A. NDMP must be enabled.
- B. The Snapshot schedule must be configured.
- C. The SVMs must be peered.
- D. The primary and secondary clusters must be peered.
Answer: B,C
NEW QUESTION 92
Click the Exhibit button.
cluster2::>snapmirror show -instance
Source Path: svm1:svm1_vol3
Destination Path: svm1_2:svm1_2_vol2
Relationship Type: DP
Relationship Group Type: none
SnapMirror Schedule: 5min
SnapMirror Policy Type: async-mirror
SnapMirror Policy: DPDefault
Tries Limit: -
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Last Transfer Type: update
Last Transfer Error: -
Last Transfer Size: 72 KB
Last Transfer Network Compression Ratio: 1:1
Last Transfer Duration: 0:0:2
Last Transfer From: svm1:svm1_vol3
Last Transfer End Timestamp: 09/24 13:10:04
Progress Last Updated: -
Relationship Capability: 8.2 and above
Lag Time: 0:0:55
Number of Successful Updates: 1
Number of Failed Updates: 0
Number of Successful Resyncs: 0
Number of Failed Resyncs: 0
Number of Successful Breaks: 0
Number of Failed Breaks: 0
Total Transfer Bytes: 212992
Total Transfer Time in Seconds: 5
You want to view your SnapMirros relationship to make sure it is up to date. You issue the snapmirror show -instance command. Referring to the exhibit, how long has it been since the last SnapMirror update has successfullyoccurred?
- A. 5 seconds
- B. 5 minutes
- C. 55 seconds
- D. 55 minutes
Answer: C
NEW QUESTION 93
You are performing a routine health check for a customer and need to determine if the disk shelf firmware is up to date.
From My AutoSupport, which report would you use?
- A. Visualization
- B. Transition Advisor
- C. Event Viewer
- D. Upgrade Advisor
Answer: A
NEW QUESTION 94
A client has a FlexVol volume that is 10 TB in size and is nearly full. The volume has a Snapshot reserve of 5%, that is currently utilized at 120%. They have chosen to enable ONTAP to automatically delete the oldest Snapshot copies with a volume threshold trigger in order to free space within the volume when it becomes necessary.
In this scenario, what amount of space would be made available to the client, without additional intervention?
- A. 100 GB
- B. 50 GB
- C. 500 GB
- D. 1000 GB
Answer: D
NEW QUESTION 95
Click the Exhibit button.
You want to restore a file from the engineering volume that is shown in the exhibit. When you click Restore in OnCommand UnifiedManager, there are no files available to restore.
Referring to the exhibit, what caused this problem?
- A. The engineering volume is currently online.
- B. The engineering volume is unprotected.
- C. No Snapshot copies exist for the engineering volume.
- D. Workflow Automation is not configured to restore files from Snapshot copies.
Answer: D
NEW QUESTION 96
An administrator wants to use SnapCenter 4.1 to back up and restore both their VMware Horizon environment and Microsoft SQL attached database.
In this scenario, which service account role should be configured to accomplish this task?
- A. sysadmin
- B. operator
- C. backup
- D. administrator
Answer: D
NEW QUESTION 97
Click the Exhibit button.
An employee's computer and mapped home folder has been encrypted with ransomware. You are asked to restore the data from a SnapVault repository.
Referring to the exhibit, what happens when the volume is restored?
- A. The restore is performed locally.
- B. All files in the volume are restored.
- C. The original data is decrypted in place.
- D. Only files that have changed in the volume are restored.
Answer: B
NEW QUESTION 98
A customer has a MetroCluster configuration and wants to automate the disaster recovery process for unplanned automatic switchover.
Which NetApp tool would accomplish this task?
- A. ONTAP Mediator
- B. ONTAP System Manager
- C. Active IQ Unified Manager
- D. SnapCenter
Answer: C
NEW QUESTION 99
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choosetwo.)
- A. A manual re-synchronization is needed.
- B. The source volume is unavailable for I/O
- C. The source volume is available for I/O.
- D. A manual re-synchronization is not needed.
Answer: A,B
NEW QUESTION 100
Click the Exhibit button.
You have a volume that was configured a year ago using the default Snapshot policy that is shown in the exhibit. You need to increase the number of hourly maximum Snapshot copies to retain only four copies.
Which additional action is needed to keep only four hourly Snapshot copies in this volume after modifying the schedule?
- A. Modify the Snapshot reserve.
- B. Reapply the default policy to the volume
- C. Delete two hourly Snapshotcopies
- D. Modify the volume guarantee
Answer: C
NEW QUESTION 101
A previous administrator had configured an external backup system to use node-scoped NDMP for backups, but you want to change this system to use SVM-scoped NDMP.
How do you make this change in ONTAP?
- A. Restart the NDMP service on the cluster.
- B. Turn off node-scoped NDMP on the SVMs being backed up.
- C. Restart the NDMP service on the SVMs being backed up.
- D. Turn off node-scoped NDMP on the cluster.
Answer: D
NEW QUESTION 102
Click the Exhibit button.
A client has a SnapMirror relationship between two sites that is scheduled to run once a day at 12:15 a.m.
They have a network connection between two sites thatprovides 100 Mbps on bandwidth. By performing the backup at this time, they can maximize their bandwidth use.
Referring to the exhibit, how long does the SnapMirror update take to finish?
- A. four hours
- B. two hours
- C. three hours
- D. one hour
Answer: B
NEW QUESTION 103
......
NS0-527 Exam Dumps Pass with Updated 2022 Certified Exam Questions: https://pass4sure.examcost.com/NS0-527-practice-exam.html
