The Best 350-601 Exam Study Material and Preparation Test Question Dumps
Get Ready to Pass the 350-601 exam Right Now Using Our CCNP Data Center Exam Package
Cisco 350-601 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| Security | 15% | 1.Apply network security
2.Apply compute security
3.Apply storage security
|
| Automation | 15% | 1.Implement automation and scripting tools
2.Evaluate automation and orchestration technologies
|
NEW QUESTION # 381
Refer to the exhibit.
Drag and drop each traffic flow type from the left onto the corresponding number on the right Not all traffic flow types are used
Answer:
Explanation:
Explanation
Table Description automatically generated
NEW QUESTION # 382
Drag and drop the storage technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
Explanation
Application Description automatically generated
NEW QUESTION # 383
Refer to the exhibit.
A network engineer is setting up a multihomed OTV network. The first site has been set up with a primary and secondary adjacency server. Which configuration must be added on the remote OTV AEDs site?
- A. interface Overlay200
otv join-interface Ethernet1/2
otv extend-vlan 178, 2500-2563 - B. interface Overlay200
otv join-interface Ethernet1/2
otv extand-vlan 178, 2500-2563
otv adjacency-server unicast-only - C. interface Overlay200
otv join-interface Ethernet1/2
otv extend-vlan 178, 2500-2563
otv use-adjacency-server 20.1.1.1 unicast-only - D. interface Overlay200
otv join-interface Ethernet1/2
otv extend-vlan 178, 2500-2563
otv use-adjacency-server 20.1.1.1 20.2.1.1 unicast-only
Answer: D
NEW QUESTION # 384
Refer to the exhibit.
An engineer needs to implement a monitoring session that should meet the following requirements:
* Monitor traffic from leaf to leaf switches on a Cisco ACI network
* Support filtering traffic from Bridge Domain or VRF
Which configuration must be added to meet these requirements?
- A. application app1 epg epg1
- B. interface eth 1/2 switch 101
- C. application epg epg1 app1
- D. interface eth 1/2 leaf 101
Answer: A
NEW QUESTION # 385
A network engineer must SPAN only the ingress traffic of a Cisco MDS 9000 series switch from interface fc
1/23 to interface fc 1/24. Which two configuration must be applied to complete this task? (Choose two)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: B,C
Explanation:
To SPAN only the ingress traffic on a Cisco MDS 9000 series switch, the configuration must include specifying the source interface for monitoring (fc 1/23) and setting it to capture only ingress traffic (rx).
Option A and Option C contain the necessary commands to achieve this.
References: = Detailed steps and examples for configuring SPAN to monitor ingress traffic on Cisco MDS
9000 series switches can be found in the Cisco MDS 9000 Series System Management Configuration Guide
NEW QUESTION # 386 
Refer to the exhibit. A secure server that provides services to EPG-2 must be placed in EPG-1. The remaining EPGs-EPG-2, EPG-3. and EPG-4-must communicate without any contracts. Which set of actions accomplishes this goal?
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: C
NEW QUESTION # 387
A remote data center must be connected to the main branch via the SD-WAN network. In addition, the footprint of the solution must be minimal and the Cisco HyperFlex deployment must be managed and monitored as part of the core HyperFlex hardware. Which set of actions meets these requirements?
- A. Deploy two HyperFlex Hybrid nodes.
Deploy an Intersight server locally for management. - B. Deploy three HyperFlex Compute-only nodes.
Use Intersight for remote management. - C. Deploy three HyperFlex All Flash nodes.
Deploy Intersight virtual appliance for local management. - D. Deploy two HyperFlex Edge nodes.
Use Cisco Intersight for remote management.
Answer: D
Explanation:
Deploying HyperFlex Edge nodes is suitable for a remote site where the infrastructure footprint needs to be minimal. HyperFlex Edge requires fewer nodes (minimum of two) compared to traditional HyperFlex clusters, which reduces hardware requirements. In addition, Cisco Intersight provides centralized cloud-based management for HyperFlex deployments, making it ideal for remote management without needing extensive on-site infrastructure.
NEW QUESTION # 388
An engineer must shut down the Ethernet 1/2 interface when the Ethernet 4/5 interface state is down. Drag and drop the CLI commands from the bottom onto the blanks in the exhibit to implement this EEM. Not all commands are used.
Answer:
Explanation:
Explanation
Text Description automatically generated
NEW QUESTION # 389
Which service profile is affected if the default host firmware policy in Cisco UCS Manager is changed?
- A. any service profile that has no host firmware policy defined
- B. any service profile that uses the global-default host firmware policy
- C. any service profile that is not in the root sub-org
- D. any service profile that uses a user-created host firmware policy
Answer: A
NEW QUESTION # 390
Which two firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle? (Choose two.)
- A. third-party
- B. PSU
- C. system
- D. CIMC
- E. BIOS
Answer: D,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Firmware-Mgmt/4-0/b_UCSM_GUI_Firmware_Management_Guide_4-0/b_UCSM_GUI_Firmware_Management_Guide_4-0_chapter_0100.html
NEW QUESTION # 391
An engineer needs to create a new user in the local user database on Cisco UCS Fabric Interconnect. The user needs permissions to change the following configuration inside UCS Manager version 3.1:
* vNIC and vHBA profiles
* Fan speed and power redundancy profile of UCS Manager
Which two roles must be assigned to a user to achieve this goal? (Choose two.)
- A. server-equipment
- B. server-profile
- C. facility-manager
- D. server-compute
- E. operations
Answer: A,D
Explanation:
Section: Network
Explanation/Reference:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin- Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_UCSM_Admin_Mgmt_Guide_chapter_01.html
NEW QUESTION # 392
Refer to the exhibit.
Which statement describes the default gateway configuration of the vPC?
- A. Either switch can act as the active default gateway.
- B. N7K-2 acts as the default gateway for all traffic.
- C. N7K-2 forwards traffic that is destined for the default gateway by using the peer link.
- D. N7K-1 acts as the default gateway for all traffic.
Answer: A
Explanation:
Explanation
https://community.cisco.com/t5/networking-documents/peer-gateway-feature-on-the-nexus-7000/ta-p/3113290
NEW QUESTION # 393
A customer reports Fibre Channel login requests to a cisco MDS 9000 series Switch from an unauthorized source. The customer requires a feature that will allow all devices already logged in and learned in and learned to be added to the Fibre channel active database. Which two features must be enabled to accomplish this goal?
(Choose two.)
- A. Device aliases
- B. Smart aliases
- C. Port security
- D. Enhanced zoning
- E. Auto-learning
Answer: C,E
Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/fm_3_3_1/p Port Security Activation By default, the port security feature is not activated in any switch in the Cisco MDS
9000 Family. By activating the port security feature, the following apply: Auto-learning is also automatically enabled, which means: From this point, auto-learning happens for the devices or interfaces that were already logged into the switch and also for the new devices will login in future. You cannot activate the database until you disable auto-learning. All the devices that are already logged in are learned and are added to the active database. All entries in the configured database are copied to the active database. After the database is activated, subsequent device login is subject to the activated port bound WWN pairs, excluding the auto-learned entries. You must disable auto-learning before the auto-learned entries become activated.
NEW QUESTION # 394 
Refer to the exhibit. A network engineer is configuring the Smart Call Home feature on a Cisco Nexus Series Switch. An email must be generated that contains the last 100 lines of the log every time a new piece of hardware is inserted into the chassis. Which command must be added to the configuration to receive the email?
- A. destination-profile Operations alert-group Inventory
- B. alert-group Operations user-def-cmd show logging last 100
- C. alert-group Linecard-Hardware user-def-cmd show logging last 100
- D. destination-profile Operations message-level 2
Answer: C
NEW QUESTION # 395
Anetwork engineer must configure a vPC on a pair of Cisco Nexus switches connected to a third-party load balancer. The connection must meet these requirements:
* The port channel must be negotiated with the load balancer via an open standards protocol.
* Traffic that is sent directly to the physical MAC address of the other peer switch must be forwarded locally by the receiving switch.
Which command set accomplishes these goals?
- A. vpe domain 10 peer-switch interface Eth1/1 channel-group 1 mode on
- B. vpc domain 10peer-gateway interface Eth1/1 channel-group 1 mode active
- C. vpe domain 10 peer-switch interface Eth1/1 channel-group 1 mode active
- D. vpe domain 10 peer-gateway interface Eth1/1 channel-group 1 mode on
Answer: B
NEW QUESTION # 396 
Refer to the exhibit A network administrator experiences these issues with the network:
* PC1 is experiencing a buffering problem for video applications
* The servers that are connected to SW2 are experiencing packet drops when they connect to the Internet The engineer wants to configure the required traffic capture to investigate the issue further Which configuration must be implemented to monitor the traffic?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: C
NEW QUESTION # 397
Which two settings must be configured before enabling a Cisco UCS Manager domain for Cisco Intersight connectivity? (Choose two.)
- A. SMTP reply-to-address
- B. DNS servers
- C. NTP servers
- D. SMTP servers
- E. syslog redirection
Answer: B,C
Explanation:
Explanation
NEW QUESTION # 398
......
Topics of Cisco 350-601: Implementing and Operating Cisco Data Center Core Technologies Exam
candidates must know the exam topics before they start preparation. Because it will help them in hitting the core. Our 350-601 exam dumps will include the following topics:
Implementing Data Center Switching Protocols
- Port Channels Overview
- Spanning Tree Protocol
- Virtual Port Channels Overview
Implementing First-Hop Redundancy Protocols
- First Hop Redundancy Protocol (FHRP) for IPv6
- Virtual Router Redundancy Protocol (VRRP) Overview
- Hot Standby Router Protocol (HSRP) Overview
Implementing Routing in Data Center
- Border Gateway Protocol
- Open Shortest Path First (OSPF) v2 and Open Settlement Protocol (OSP) v3
Implementing Multicast in Data Center
- Cisco Overlay Transport Virtualization
- Virtual Extensible LAN
- Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD)
- IP Multicast on Cisco Nexus Switches
Implementing Network Infrastructure Security
- Describing Cisco Application-Centric Infrastructure
- Media Access Control Security
- First Hop Security
- Controlling Traffic Flow with Contracts
- Cisco ACI Overview, Initialization, and Discovery
- Keychain Authentication
- VMM Domain EPG Association
- Virtual Switches and Cisco ACI VMM Domains
- Authentication, Authorization, and Accounting (AAA) and SSH on Cisco NX-OS
- User Accounts and Role-Based Access Control (RBAC)
- Cisco ACI Fabric Access Policies
- Cisco ACI Endpoints and Endpoint Groups (EPG)
- Cisco ACI Integration with Hypervisor Solutions
- Cisco ACI Management
Describing Packet Flow in Data Center Network
- Data Center Traffic Flows
- Describing Cisco Cloud Service and Deployment Models
- Cloud Deployment Models
- Packet Flow in Cisco ACI Fabric
Describing Data Center Network Infrastructure Management, Maintenance, and Operations
- Software Updates
- Network Configuration Management
- Time Synchronization
- Network Infrastructure Monitoring
Explaining Cisco Network Assurance Concepts
- Network Access Server (NAS) Concepts
- Virtual Storage Area Network (VSAN) Overview
- SAN Port Channels Overview
- Distributed Device Aliases
- Cisco Streaming Telemetry Overview
- Storage Area Network (SAN) Design Options
- Fibre Channel Basics
- Zoning
- Implementing Storage Infrastructure Services
- Fibre Channel Domain Configuration Process
- Describing FCoE
- Fibre Channel over Ethernet
- FCoE Topology Options
- Need for Network Assurance
- Fibre Channel over IP
- FCoE Implementation
- Implementing Fibre Channel Fabric
- N-Port Identifier Virtualization (NPIV) and N-Port Virtualization (NPV)
Implementing Storage Infrastructure Security
- Software Installation and Upgrade
- User Accounts and RBAC
- Fibre Channel Port Security and Fabric Binding
Describing Cisco UCS Server Form Factors
- Cisco UCS Fabric Interconnect
- Implementing Cisco Unified Computing SAN Connectivity
- ISCSI Overview
- Cisco UCS B-Series Blade Servers
- Cisco UCS B-Series Connectivity
- Key Management
- Implementing Unified Computing Security
- Implement FCoE
One of the key objectives of the Cisco 350-601 Exam is to test an individual's knowledge of data center networking technologies. This includes understanding the different types of data center networks, such as LAN, SAN, and VLAN, as well as the various protocols and technologies used in data center networking, including Spanning Tree Protocol (STP), Virtual Port Channels (vPC), and Data Center Interconnect (DCI).
Get Special Discount Offer of 350-601 Certification Exam Sample Questions and Answers: https://pass4sure.examcost.com/350-601-practice-exam.html
