Buying study materials should be simpler than studying them. At ExamCost it takes four steps: pick a format, enter your correct email address, pay by credit card, and receive the NSE7_EFW-7.2 package by email within about 1 minute.
Fortinet NSE7_EFW-7.2 Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| Topic 1: Central management | - Implement central management |
| Topic 2: Security profiles | - Configure and troubleshoot various security profiles |
| Topic 3: Routing | - Implement and troubleshoot routing protocols (BGP, OSPF) |
| Topic 4: VPN | - Implement and troubleshoot IPsec VPN with IKEv2 |
| Topic 5: System configuration | - Configure different operation modes for an HA cluster - Configure hardware acceleration - Implement the Fortinet Security Fabric |
Questions About the Fortinet NSE 7 - Enterprise Firewall 7.2 Exam, Answered
The official Fortinet NSE 7 - Enterprise Firewall 7.2 outline defines 5 domains. The leading three are VPN, Central management, and Security profiles. The full list is in the topics section above, and ExamCost's 82 practice questions cover each one.
The NSE7_EFW-7.2 exam is a Fortinet certification exam validating the Fortinet NSE 7 - Enterprise Firewall 7.2 syllabus shown above. It belongs to these credential paths: Fortinet Certified Solution Specialist - Network Security, NSE 7 Network Security Architect. In a crowded 2026 job market, the credential demonstrates ability visibly — and ExamCost prepares candidates with 82 practice questions in PDF, Desktop Test Engine, and Online Test Engine formats.
ExamCost issues a full refund if you take the Fortinet NSE 7 - Enterprise Firewall 7.2 exam within 60 days of purchase and do not pass. The policy does not apply if the exam is taken within 3 days of purchase, if the exam was never actually taken, or to free materials or expired orders, and the candidate name must match the payer name. Submit a scan of your enrollment slip and the official Score Report PDF within 2 days of the exam; claims are processed within 7 days. Alternatively, exchange for two free exam products of equal value and keep your original update service. Orders arrive by email within 1 minute — contact support if nothing arrives within 2 hours.
Proctored at a Pearson VUE testing center. Register for the Fortinet NSE 7 - Enterprise Firewall 7.2 exam through these official channels:
After booking, ExamCost delivers your practice questions within 1 minute — preparation starts the same day.
The Fortinet NSE 7 - Enterprise Firewall 7.2 exam requires 70% to pass, and registration costs USD 250. A failed attempt means paying the same fee again — a readiness check with the ExamCost engines before booking is the cheaper option.
Three versions of the same study materials: a printable, expert-prepared PDF with free demo download and instant access; a Desktop Test Engine for Windows that simulates the real exam with two practice modes and works offline; and an Online Test Engine for any browser on Windows, Mac, Android, and iOS with test history and performance review. All 82 practice questions are identical across versions. Every purchase includes 365 days of free updates — pushed to you automatically whenever the bank is revised — plus a 50% renewal discount afterward and unlimited computer installations.
The Fortinet NSE 7 - Enterprise Firewall 7.2 exam contains 35 to complete within 60 minutes. Timed simulation in the ExamCost Desktop Test Engine teaches that rhythm before exam day does.
Fortinet recommends these training resources for the Fortinet NSE 7 - Enterprise Firewall 7.2 exam:
Follow the training with steady self-testing — the 82 practice questions from ExamCost help you apply theory and fill any gaps the training leaves.
Recommended: NSE 4 certification and practical experience with FortiOS, FortiManager, and FortiAnalyzer. Since requirements change over time, confirm the latest on the official Fortinet exam page before scheduling.
Fortinet NSE 7 - Enterprise Firewall 7.2 Sample Questions:
An administrator has configured two fortiGate devices for an HA cluster. While testing HA failover, the administrator notices that some of the switches in the network continue to send traffic to the former primary device What can the administrator do to fix this problem?
- A. Verify that the speed and duplex settings match between me FortiGate interfaces and the connected switch ports
- B. Configure set send-garp-on-failover enables under config system ha on both cluster members
- C. Configure remote Iink monitoring to detect an issue in the forwarding path
- D. Configure set link -failed signal enable under-config system ha on both Cluster members
Correct Answer: B 🗳️
Explanation: Only visible for ExamCost members. You can sign-up / login (it's free).
Exhibit.
Refer to the exhibit, which contains a CLI script configuration on FortiManager.
An administrator configured the CLI script on FortiManager Which statement is true based on the script configuration?
- A. The script successfully added a static route with gateway 10.20.121.2 on the manages device
- B. The CLI scripts failed to execute because of an incomplete command
- C. The commands are missing d3_cmd at beginning
- D. CLI scripts must start with # l.
Correct Answer: B 🗳️
Refer to the exhibit, which shows two configured FortiGate devices and peering over FGSP.
The main link directly connects the two FortiGate devices and is configured using the set session-syn-dev <interface> command.
What is the primary reason to configure the main link?
- A. To have only configuration synchronization in layer 3
- B. To load balance both sessions and configuration synchronization between layer 2 and 3
- C. To have both sessions and configuration synchronization in layer 3
- D. To have both sessions and configuration synchronization in layer 2
Correct Answer: C 🗳️
Explanation: Only visible for ExamCost members. You can sign-up / login (it's free).
Which configuration can be used to reduce the number of BGP sessions in on IBGP network?
- A. Route-reflector-peer enable
- B. Route-reflector enable
- C. Route-reflector-server enable
- D. Route-reflector-client enable
Correct Answer: D 🗳️
Explanation: Only visible for ExamCost members. You can sign-up / login (it's free).
Refer to the exhibit.

The partial interlace configurator! of two FortiGate devices is shown
Which two conclusions can you draw from this configuration? (Choose two.)
- A. At the time of failover, FortiGate_A will change its priority to 30
- B. By default, preemption mode is enabled
- C. You can include 4.4.4.4 and 4.4.4.2 IP addresses using sat vrdst command
- D. In VRRP, you are restricted to add a third FortiGate into VRRP group 1.
Correct Answer: A,B 🗳️





